Apsauginis stiklas telefonui 5D UV Realme 12 Pro 5G / 12 Pro+ 5G Hofi UV Glass Pro+ skaidrus

Aprašymas

The Hofi UV Glass Pro + tempered glass protects a significant part of the rounded screen, has a surface hardness of 9H, which is why it is extremely scratch-resistant even when in contact with sharp objects, and additionally, it is covered with an oleophobic coating that reduces the number of fingerprints.

The UV model is glued with a liquid substance on the entire surface of the screen, and then the substance is cured with a UV lamp.
Thanks to this combination, we obtain the perfect effect of smoothness, clarity and responsiveness.
Installation is easy and user-friendly

Check how to mount: https://www.youtube. com / watch? v = W7uxROE7ywk & amp; feature = youtu.be

* We do not recommend the use of 3D glass without any housing.
** We do not recommend the use of glass if the housing overlaps the edges of the screen too much, there is a risk of leverage.
*** The functionality of the fingerprint reader in the screen may be slightly disturbed in the case of installed coating in the form of foil or glass. The fingerprint reader is not fully developed in terms of additional coatings.

ASSEMBLY INSTRUCTIONS:
1) Begin installation in the bathroom right after the bath – the steam will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Clean thoroughly and degrease the surface of the screen, then use a dry cloth to polish it to a shine.
3) Use the tape from the kit to cover the speaker.
4) Connect the UV lamp to the power source with the Type-C cable.
5) Pour the liquid into the center of the device.
6) Install the glass as smoothly as possible, this stage can also be corrected before the surface hardens when the liquid is on the screen along with the glass.
7) If it appeared a blister with air, use an ATM card and gently push it outside the glass, this is done before curing.
8) Using a UV lamp, harden the glass along the center in five places for 15 seconds and then around the edge for 10 seconds .
9) Clean the phone of remnants of cured glue.
10) If your born the device has a fingerprint reader in the screen, remember to remove and re-add fingerprints after installing the glass on the screen.
11) Enjoy a job well done!

PRODUCT FEATURES:
– 100% Original
– Packed in original packaging
– 0.3mm thick tempered glass
– Scratch resistance 9H
– Equipped with an oleophobic coating
– Leaves no trace when dismantled

SET CONTAINS:
1 x Hofi UV Glass Pro +
1 x UV lamp (without Type-C cable)
1 x Adhesive tube
1 x Installation Kit

Papildoma informacija