Wybot Winny 200 wireless pool cleaning robot

Prekės kodas: @1965779

104,14 

Užsakomoji prekė.

Numatoma atsiėmimo*/išsiuntimo** data:

2026-03-12

*atsiėmimo taške Ozo g. 20, Vilnius

**pristatymas kurjeriu papildomai 1-2 darbo dienos nuo išsiuntimo

PASITEIRAUTI APIE PREKĘ

    PARAŠYKITE MUMS:

    Aprašymas

    Wybot Winny 200 wireless pool cleaning robot

    Wybot Winny 200 is a wireless robot designed for automatic cleaning of above-ground pools with an area of up to 60 m². It stands out with its operating time of up to approximately 80 minutes and filtration capacity of 7.5 m³/h. Powered by a 3200 mAh battery, it eliminates the need for cables, which increases convenience and safety of use. Its compact design and weight of 3.3 kg make the robot easy to carry, and its IPX8 waterproof rating allows for trouble-free operation when submerged up to 2.5 m.

    White pool robot with a transparent dome floating on the surface of the water with splashes around it

    Effective cleaning and enhanced suction power

    The robot is equipped with an improved suction system with a power of up to 30 W, which enables effective collection of sand, leaves, and small debris. The design prevents debris from backing up, so once sucked up, the dirt remains in the device without the risk of being released back into the water. What's more, with a speed of approximately 16 m/min, the Winny 200 effectively covers the entire area to be cleaned.

    Cross-section of the pool robot underwater showing the internal components with blue cylinders and brushes cleaning the bottom of the pool

    Two-stage filtration system

    The Winny 200 uses a two-stage filtration system consisting of a foam filter and a 180 µm density tray. This combination effectively captures both larger debris and fine particles. The filter is also easy to remove and clean – you can simply rinse it with water.

    A woman in a white shirt washing the pool robot's filter with a stream of water from a garden hose

    Intelligent parking at the edge of the pool

    The smart sensor technology means that when the battery is low, the robot automatically heads towards the pool wall and stops near it. This, combined with the hook included in the set, makes it easy to remove the device from the water.

    Two white pool robots with transparent domes cleaning the bottom of a turquoise pool, visible white arrows indicating the direction of movement

    Wireless convenience and simple operation

    Operating the robot has been simplified as much as possible – just press the button and immerse the device in water to automatically start cleaning. In addition, the wireless design eliminates the need for cables and any range limitations. Relax and watch Winny 200 do the cleaning!

    A hand touching a red button on a white pool robot with turquoise backlighting, against a light blue background

    Lightweight design, long operating time, and fast charging

    The low weight and integrated handle make it easy to carry the robot, and the operating time of up to approximately 80 minutes is sufficient to thoroughly clean even a large pool – up to 60 m². The robot charges in about 4 hours, and the built-in LED indicator shows the charging status.

    A white pool robot with a transparent turquoise dome being pulled out of the pool at the edge, water dripping from the device

    Included in the set

    • Cleaning robot
    • Filter basket (foam + 180 µm filter)
    • Handle and grip
    • Scraper x2
    • Hook for removing the robot from the water
    • Screws
    • Charger
    • User manual

     

    Manufacturer Wybot
    Model Winny 200 (HJ102P)
    Operating voltage 11.1 V
    Power 30 W
    Operating time Approx. 80 min
    Charger input voltage 100–240 V
    Charger frequency 50/60 Hz
    Adapter output voltage 12.6 V
    Charger output current 1 A
    Battery capacity 3200 mAh
    Charging time Approx. 4 h
    Maximum pool area 60 m²
    Filtration capacity 7.5 m³/h
    Filtration type Two-stage
    Travel speed Approx. 16 m/min
    Ingress protection class IPX8
    Water temperature 10°C to 35°C
    Charging temperature 5°C to 35°C
    Maximum water depth 2.5 m
    Dimensions 330 × 308 × 228 mm
    Weight 3.3 kg
    Storage temperature -20°C to 45°C

    Atsiliepimai

    Atsiliepimų dar nėra.


    Rašyti atsiliepimą gali tik prisijungę pirkėjai, kurie yra įsigiję šį produktą.

    ** Pastebėjote klaidą prekės aprašyme ar nuotraukų galerijoje? Praneškite mums!

      PRANEŠKITE APIE KLAIDĄ:


      REKOMENDUOJAME JUMS