Apsauginis stiklas Tech-Protect GLASS UV+ 2-pack Xiaomi Redmi Note 15 Pro+ Plus 5G skaidrus

Aprašymas

Tech-Protect Glass UV+ is a tempered glass with a UV coating. Ultraviolet light-curing adhesive technology ensures the glass adheres perfectly to the screen, maintaining full transparency and touch sensitivity. The set includes two glasses and a UV lamp, ensuring your device is protected from day one.

The glass achieves a hardness of 9H on the Mohs scale, providing effective protection against keys, coins, and other items we carry in our pockets. Its 0.3 mm thickness maintains the slim profile of your smartphone and does not affect the responsiveness of the touchscreen. The material absorbs impact energy, protecting the display from cracking even during falls. Thanks to UV technology, the glass also covers the curved edges of the screen, eliminating air bubbles.

An oleophobic coating reduces fingerprints and makes the surface easier to clean. The image remains crystal clear with accurate color reproduction, while the smooth glass surface preserves precise gestures and smooth scrolling. After installation, remember to re-enroll your fingerprint reader to ensure optimal performance with the new protective layer.

* We do not recommend using 3D glass without a case.

** We do not recommend using glass if the case overlaps the edges of the screen too much, as it may be prying open.

*** The functionality of the in-screen fingerprint reader may be slightly impaired if a protective film or glass is installed. The fingerprint reader is not fully compatible with additional coatings.

Product Features

100% Original
Packed in original packaging
UV lamp application
9H glass hardness
Only 0.3 mm thick
Oleophobic coating to reduce fingerprints
Full coverage of curved edges

Specifications

Type
Tempered glass with UV application
Coating
Oleophobic
Hardness
9H
Dimensions
159.80 x 75.00 mm

Compatibility
Xiaomi Redmi Note 15 Pro+ Plus 5G

Kit includes

2 × Tech-Protect Glass UV+ tempered glass

1 × UV lamp

2 × Installation kit

Installation instructions

Start installation in the bathroom right after showering – the water vapor will absorb all dust from the atmosphere, eliminating any interference during installation. Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
Cover the speaker with the included tape.
Connect the UV lamp to a power source using a Type-C cable.
Pour the liquid into the center of the device.
Install the glass as evenly as possible. You can also adjust this step before curing the surface, while the liquid is still on the screen and the glass.
If an air bubble appears, use a bank card and gently push it out of the glass. This step is done before curing.
Using the UV lamp, cure the glass along the center in five places for 15 seconds each, and then around the edges for 10 seconds each.
Clean any remaining cured glue from the phone.
If your device has a fingerprint reader, remember to remove and re-apply the fingerprints after installing the glass.
Congratulations on a job well done!