Bublue A10 PS baseino valymo robotas

Aprašymas

Bublue A10 PS pool cleaning robot

The Bublue A10 PS is a modern pool cleaning robot designed to remove dirt from the bottom and work near the walls – without the need for manual intervention. Thanks to its high power (33 W), it effectively eliminates sand, leaves, and small debris in just one cycle. It works wirelessly for up to 90 minutes, and fast charging means it is ready for the next cycle after only about 3 hours. The DirtLock™ Tech 2.0 system effectively traps dirt in the filter basket, and intelligent wall detection makes it easier for it to move around. In addition, the self-parking function allows you to conveniently remove the robot after it has finished its work. The whole thing is complemented by LEDs that indicate the status of the device.

Bluehole Technology™ – effectiveness visible after one cycle

The high cleaning efficiency is due to the new Bluehole Technology™, which improves the cooperation between the nozzle, motor, and suction impeller. This translates into up to twice the overall performance compared to previous solutions, as well as 3× better leaf collection efficiency and 8.5× higher efficiency in removing debris between 3 and 8 mm in size (compared to the previous generation). As a result, one cleaning cycle is enough to restore cleanliness without the need for manual vacuuming or repeated operation of the device.

Smart sensors, autonomous parking, and clear LED signals

The Bublue A10 PS pool robot has been designed with maximum user convenience in mind, which is why it uses advanced contact sensors that enable quick and precise response to pool walls. The Corner Boost™ technology increases the intensity of cleaning in corners, offering up to twice the effectiveness of removing dirt in these critical areas. When it encounters an edge, the robot automatically corrects its path, moving smoothly and without chaotic bouncing, which translates into smoother and more effective cleaning of the bottom. At the end of the cycle, the device parks itself against the pool wall, making it quick and convenient to remove from the water. In addition, built-in LEDs provide real-time information on the operating status, charge level, and readiness of the device.

Double filtration and DirtLock™

The dual filtration system combines two levels of 80 and 150 mesh screens, effectively capturing both larger debris such as leaves and fine sand or sediment. This solution increases average suction efficiency by up to 15% and keeps the water cleaner throughout the entire cycle. This is complemented by DirtLock™ technology, which allows water to be quickly drained from the robot in about 5 seconds, reducing maintenance time by up to 80% and preventing almost 100% of collected debris from flowing back into the pool. In addition, the optimized basket design provides up to 30% more capacity compared to standard solutions, which means longer operation without the need for frequent emptying.

Precise component interaction – stable suction power throughout the entire operating cycle

The Bublue A10 PS features an optimized suction system in which the nozzle, motor, and impeller work in complete synchronization. This design allows for smooth flow of water and debris throughout the entire system, without power loss or sudden drops in performance. The precise alignment of these components translates into stable, effective suction of both small particles and larger debris, regardless of the degree of contamination at the bottom of the pool. The result is consistent robot operation, better energy utilization, and consistently high cleaning efficiency from start to finish.

Long operating time and fast charging – ready to clean when you need it

The robot is equipped with a 4400 mAh battery, providing up to 90 minutes of uninterrupted operation, allowing you to thoroughly clean the bottom of the pool in a single cycle. After cleaning, the device recharges in about 3 hours, so it quickly returns to full readiness and does not require long breaks between uses. This combination of operating time and charging time makes the Bublue A10 PS ideal for above-ground pools with a surface area of up to approximately 80 m² and a flat bottom.

Simple maintenance – cleaning the robot without tools and without effort

After finishing work, simply rinse the filter and robot housing with a regular garden hose – no need to disassemble the device or use additional accessories. This form of cleaning allows you to easily remove sand, leaves, and small debris.

Included:

• Pool cleaning robot
• Charger
• Hook for pulling the robot out of the water
• Handle
• Brush x2
• User manual