3D Plastikas – Filamentas TPU 95A HF With spool/Su rite mėlynos spalvos | 1.75 mm, 1kg | Bambu Lab
Prekės kodas: @1914591
39,36 €
Užsakomoji prekė.
Numatoma atsiėmimo*/išsiuntimo** data:
*atsiėmimo taške Ozo g. 20, Vilnius
**pristatymas kurjeriu papildomai 1-2 darbo dienos nuo išsiuntimo
Pranešti kai prekė vėl bus prekyboje
- Aprašymas
- Atsiliepimai (0)
Aprašymas
Bambu TPU 95A HF
Bambu TPU 95A HF is an optimized TPU filament designed for high-speed 3D printing. Compared to regular TPU 95A, TPU 95A HF offers an impressive 3x faster printing speed, effectively addressing the common problem of lengthy prints associated with other TPU filaments. TPU 95A HF maintains exceptional interlayer adhesion, impact resistance, flexibility, and cold-temperature resilience, just like traditional TPU filaments. Experience faster TPU printing without any compromises!
High Speed Printing
Elevate your TPU printing efficiency to the next level with Bambu TPU 95A HF, featuring a print speed that’s 3 times faster than standard TPU 95A.
| Bambu TPU 95A | Bambu TPU 95A HF | |
| Nozzle Temperature / °C | 230 | 230 |
| Max Volumetric Speed / (mm³/s) | 3.6 | 12 |
| Printing Speed / (mm/s) | 44 | 147 |
| Model Specimens | Diameter: 50 mm Height: 100 mm Infill:40% | |
Soft and Flexible
Bambu TPU HF is an exceptionally soft and flexible filament with extraordinary impact resistance, enabling you to print parts that need withstand impact, collision, and falling.
Widely Used Application
Accessory Compatibility
| Recommended | Not Recommended | |
| Build Plate | Smooth PEI Plate, Textured PEI Plate | Cool Plate SuperTack |
| Hotend | Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mm Hotend with Stainless Steel Nozzle 0.4 mm |
Hotend with Hardened Steel Nozzle 0.2 mm Hotend with Stainless Steel Nozzle 0.2 mm |
| Glue | Bambu Liquid Glue Glue Stick |
/ |
TPU 95A HF Hex Code Table
| Color | Hex Code | Display |
| White | #FFFFFF | |
| Yellow | #F3E600 | |
| Blue | #0072CE | |
| Red | #C8102E | |
| Gray | #898D8D | |
| Black | #101820 |
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 70 °C，8 h |
| Printing and Keeping Container’s Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 220 – 240 °C |
| Bed Temperature (with Glue) | 30 – 35 °C |
| Printing Speed | < 200 mm/s |
| Physical Properties | |
| Density | 1.22 g/cm³ |
| Vicat Softening Temperature | N / A |
| Heat Deflection Temperature | N / A |
| Melting Temperature | 183 °C |
| Melt Index | 36.5 ± 2.6 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 27.3 ± 0.8 MPa |
| Breaking Elongation Rate | > 650% |
| Bending Modulus | N / A |
| Bending Strength | N / A |
| Impact Strength | N / A |
Rašyti atsiliepimą gali tik prisijungę pirkėjai, kurie yra įsigiję šį produktą.
Atsiliepimai
Atsiliepimų dar nėra.