3D Plastikas – Filamentas PLA Glow Green With spool/Su rite | 1.75mm, 1kg | Bambu Lab
33,43 €
Užsakomoji prekė.
Numatoma atsiėmimo*/išsiuntimo** data:
2026-04-14*atsiėmimo taške Ozo g. 20, Vilnius
**pristatymas kurjeriu papildomai 1-2 darbo dienos nuo išsiuntimo
- Aprašymas
- Atsiliepimai (0)
Aprašymas
- Unique Glow in Low Light Conditions
- Comes with Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
- A Hardened Steel Nozzle is required when printing
- Stainless Steel Nozzles NOT Compatible
- 0.2 mm nozzles NOT Compatible
- AMS 2 Pro, AMS HT & AMS Compatible, but can lead to faster wear
- AMS lite NOT Compatible
Bambu PLA Glow
PLA Glow stands out due to its incorporation of a unique additive: luminous powder. This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties. What sets PLA Glow apart is its distinctive feature – it glows in the dark. This makes it the optimal selection for crafting luminous nameplates, logos, jewelry, and various models that require a captivating glow effect.
Unique Glow in Low Light Conditions
Bambu PLA Glow incorporates a distinct additive: luminous powder, which imparts a special property to printed objects, causing them to emit a captivating glow in the dark.
Accessory Compatibility
| Recommended | Not Recommended | |
| Build Plate | Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate | / |
| Hotend | Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mm | Hotend with Stainless Steel Nozzle |
| Glue | Bambu Liquid Glue Glue Stick |
/ |
| AMS & AMS lite | AMS | AMS lite* |
*It is not recommended to print Bambu PLA Glow and other glow-in-the-dark PLA filaments with AMS Lite. These filaments, being hard and rough, may cause feeding failures due to substantial feeding resistance.
PLA Glow Hex Code Table
| Color | Hex Code | Display |
| Glow Green | #A1FFAC | |
| Glow Yellow | #F8FF80 | |
| Glow Pink | #F17B8F | |
| Glow Blue | #7AC0E9 | |
| Glow Orange | #FF9D5B |
* The hex code indicates the daytime color of PLA Glow.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 55 °C，8 h |
| Printing and Keeping Container’s Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 – 230 °C |
| Bed Temperature (with Glue) | 35 – 45 °C |
| Printing Speed | < 250 mm/s |
| Physical Properties | |
| Density | 1.26 g/cm³ |
| Vicat Softening Temperature | 56 °C |
| Heat Deflection Temperature | 55 °C |
| Melting Temperature | 155 °C |
| Melt Index | 23.3± 2.4 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 32 ± 3 MPa |
| Breaking Elongation Rate | 8.6 ± 1.2 % |
| Bending Modulus | 2640 ± 130 MPa |
| Bending Strength | 76 ± 4 MPa |
| Impact Strength | 27.3 ± 2.2 kJ/m² |
Rašyti atsiliepimą gali tik prisijungę pirkėjai, kurie yra įsigiję šį produktą.
Atsiliepimai
Atsiliepimų dar nėra.