Mobile Origin 10000 mAh Qi2 TFT Display Semi-solid PowerBank PB19 – USB-C Cable White

Aprašymas

Mobile Origin 10000 mAh Qi2 TFT Display Semi-solid PowerBank PB19 – USB-C Cable White

PB19 combines magnetic Qi2 charging, an integrated USB-C cable, a fold-out stand, and a clear TFT display in a body measuring 92 x 64 x 29 mm. With a capacity of 10,000 mAh and wired output of up to 20 W, it serves not only as an emergency backup but also as an everyday power source when traveling. PB19 makes the most sense where MagSafe magnetic charging with a maximum output of 15 W, a stand, and a built-in cable are used.

• Semi-Solid Battery: The semi-solid cell construction increases the battery’s mechanical resistance and reduces the risk of thermal failure in the event of damage.
• TFT Display: The display shows the battery percentage as well as the current power in W, V, and A, so you can immediately see whether the device is charging at the correct power level.
• Qi2: Wireless output of up to 15 W with magnetic alignment helps keep a compatible phone precisely positioned on the coil.
• Built-in USB-C Cable: The cable is always at hand and reduces the need to carry an additional cable just for charging your phone or the power bank.
• MagSafe Compatibility: A compatible iPhone or case with a magnetic ring attaches to the power bank more firmly than to other wireless power banks.

Capacity That Matches Real-World Use

The 10,000 mAh cell provides 38.5 Wh of energy, so the power bank is not intended only for one quick top-up before leaving home. The rated capacity is 6,800 mAh, which represents the actual energy available at the output after conversion losses are taken into account. This is important when choosing a power bank: if the goal is only a lightweight backup battery for occasional emergency charging.

Safer Cell and Charging Control – Semi-Solid

PB19 uses a lithium-ion semi-solid battery. The semi-solid construction is more mechanically resistant than standard solutions with a more liquid electrolyte, so in the event of an impact or other damage, there is a lower risk of an internal short circuit and subsequent thermal failure. It is not a parameter that speeds up charging, but for a power bank carried daily in a backpack, handbag, or pocket, it is a significant difference.

Semi-Solid Battery for Higher Safety

The power bank uses a lithium-ion semi-solid battery, which is more stable in terms of construction than standard cells with a liquid electrolyte. This is especially important for a device that is frequently carried and may be exposed to pressure, shocks, or drops. In the event of mechanical damage, it helps reduce the risk of overheating and increases overall safety during everyday use.

Clear Display

The TFT display shows more than just the percentage of remaining energy. During charging, it also displays the current power and values in W, V, and A, making it easy to tell whether the phone is actually using fast charging or only a basic charging mode. This is especially useful when switching between wireless charging, the built-in cable, and the USB-C port, and when you need an instant overview of what is currently happening.

Qi2 for Precise Wireless Charging and MagSafe Compatibility

The wireless output supports 5 W, 7.5 W, 10 W, and 15 W. The Qi2 standard adds magnetic alignment, so a compatible phone attaches in the correct position on the coil. The difference is especially noticeable when moving around or when you quickly place the power bank on a table and need charging to start immediately.

MagSafe Compatibility

MagSafe compatibility means that a compatible iPhone or case with a magnetic ring attaches to the power bank more firmly than to a standard wireless power bank. Thanks to this, the phone and power bank can be used as one unit when reading, navigating, or making video calls. However, if the device does not support magnetic attachment, charging via the USB-C cable or port makes more sense.

Built-in USB-C Cable, USB-C Port, and Stand in One Body

The body of the power bank includes a built-in USB-C cable as well as a separate USB-C port. Output via both the cable and the port reaches up to 20 W, while input reaches up to 18 W, so PB19 can be used both to charge a phone and to recharge itself without additional accessories. The fold-out stand adds another practical feature: while charging, the phone can stand on a desk, which is more convenient than a power bank lying flat without support.

Dimensions, Weight, and Lifespan

With dimensions of 92 x 64 x 29 mm and a weight of 221 g, PB19 remains small enough for everyday carrying, while still feeling sturdy. Its lifespan is over 1,000 cycles to 80% capacity, which tells you how long the power bank will retain a usable energy reserve. The compact footprint, durable ABS body, and integrated elements such as the USB-C cable and stand make sense especially where the power bank is carried often and you do not want to deal with extra loose accessories.

Specifications

• Capacity: 10000 mAh (3.85V/38.5Wh)
• Rated Capacity: 6800 mAh
• Battery Type: Lithium-ion (Li-ion, semi-solid)
• Lifespan: More than 1000 cycles to 80% capacity
• Charging Time to 100%: Approximately 2 hours 10 minutes
• USB-C Cable/Port Input: 5V⎓3A, 9V⎓2A, 12V⎓1.5A (PD 18W Max)
• USB-C Cable/Port Output: 5V⎓3A, 9V⎓2.22A, 12V⎓1.67A (20W Max)
• Wireless Output: 5W/7.5W/10W/15W (15W Max)
• Product Dimensions: 92 × 64 × 29mm
• Material: ABS
• Weight: 221g

Package Contents:

• PowerBank 10000 mAh Qi2 TFT Display Semi-Solid PB19 – USB-C Cable
• USB-C to USB-C charging cable 30cm
• User manual