LOKLiK Auto Mug Heat Press

Aprašymas

The LOKLiK Auto Mug Heat Press is a compact, fully automatic sublimation press that takes the guesswork out of making personalised mugs. Set your temperature, time, and pressure, insert a wrapped mug, and let the machine clamp down, heat evenly, and release on its own – no manual lever, no watching the clock. The included heat plate module fits standard ceramic mugs from 8 to 8.8 cm in diameter, and the module system can later be swapped for straight tumblers or 1.2-litre handle tumblers, sold separately.

Key Features

• Fully automatic pressing – clamps, heats, and releases without manual effort
• Real-time digital display for temperature, time, and pressure
• Adjustable pressure from 20 to 70 kg for a tight, even wrap on every mug
• Detachable heat plate module – swap in about 10 seconds, no tools needed
• Aluminium heating core rated for 10,000+ presses
• 4 customisable presets to save your favourite settings
• 15-minute auto shut-off for unattended safety
• Works with ceramic, glass, and stainless steel mugs

LOKLiK Auto Mug Heat Press – Professional Mug Sublimation, Fully Automated

The LOKLiK Auto Mug Heat Press is built for makers and small businesses who want consistent, professional-looking sublimation mugs without babysitting a manual press. It handles the clamping, heating, and timing automatically, so every mug in a batch comes out with the same clean, vibrant transfer – whether it’s a one-off gift or a full print run.

From Manual Guesswork to Automatic Precision

Basic mug presses tend to share the same shortcomings: pressure that’s fixed and easy to over- or under-apply, no display to tell you what’s actually happening during a press, and a one-piece body that’s awkward to clean or repair. The LOKLiK Auto Mug Heat Press addresses each of these directly – pressing is automatic and hands-free, pressure is adjustable to match the mug you’re working with, a real-time display shows temperature and pressure as the press runs, and the heat plate is a separate, replaceable module rather than a fixed part of the housing.

Press in 4 Simple Steps

The workflow is short enough to learn in one attempt.

1. Load the module
Attach the right heat plate for what you’re pressing

2. Wrap your design
Wrap the sublimation transfer around the blank

3. Insert and press
Set your parameters and let the machine take over

4. Enjoy the result
Crisp, vibrant transfers on mugs, jars, and tumblers alike

4 Custom Presets

Four programmable preset slots let you save your go-to temperature, time, and pressure combinations – one for standard mugs, another for tumblers, another for a tricky material that needs its own settings. Once saved, switching between them is a single button press, instead of re-entering three numbers before every batch.

Maximised Print Coverage

A tighter heating wrap around the mug lets designs run to within about 0.5 cm of the handle, so more of the printable area actually gets used instead of being lost to a wide, unheated margin near the handle.

Adjustable Pressure for Every Mug

Pressure can be set anywhere from 20 to 70 kg, so thin, delicate mugs and thicker, heavier ones can each get the right amount of clamping force. Too little pressure risks patchy, faded transfers; too much can stress the material. The real-time display shows the exact pressure being applied throughout the press, so you’re never guessing.

Dialling in the right pressure for the material in hand makes the difference between a patchy transfer and a sharp, even, wrap-around print:

Lower pressure – suited to delicate or thin-walled items

Standard pressure – the right fit for most mugs and tumblers

Higher pressure – for a tight, gap-free wrap on sturdier items

Switch Heat Plates for More Drinkware

The included heat plate module accommodates mugs from 8 to 8.8 cm in diameter, covering the great majority of standard ceramic mugs and coffee cups on the market without any adjustment needed. And because the heat plate is a detachable module rather than a fixed part of the machine, the same press can be adapted to different drinkware. The mug module is included in the box and ready to use out of the gate; modules for straight tumblers and for 1.2-litre handle tumblers are available separately.

For Mugs
Included in the box

For Straight Tumblers
Sold separately

For 1.2-Litre Handle Tumblers
Sold separately

Swap in About 10 Seconds

Changing the module is a tool-free push-and-lock action – no screws, no separate tools, no waiting for anything to cool down first. That makes it realistic to switch between mugs and tumblers within the same crafting session instead of dedicating the machine to one product type.

Built to Last: 10,000+ Presses

Every module is built around an aluminium heating core rated for more than 10,000 presses – well beyond the 500 to 800 presses typical of basic entry-level machines. That means fewer replacements, lower running costs, and less risk of a worn-out plate causing bubbling or wrinkling mid-batch.

Built for Safer, Smarter Home Sublimation

An even heat distribution around the whole mug helps avoid the cold spots and patchy colour that come from uneven manual pressing. A real-time display keeps temperature, time, and pressure visible throughout the cycle. A 15-minute auto shut-off switches the heating element off automatically if the press is left idle, adding a layer of safety for a busy home or workshop.

Made for Home Crafters and Small Businesses

Whether it’s a one-off gift or a shelf full of orders to fulfil, the same automatic press handles both without extra fuss.

Craft memorable, personalised gifts at home

Or scale up a small sublimation business

Endless Design Possibilities

Full Set, Ready to Work

The LOKLiK Auto Mug Heat Press arrives ready to start pressing straight away: the machine itself, the mug heat plate module already sized for standard 8-8.8 cm mugs, both a 2 mm and a 4 mm heat press mat to suit different blanks, a pair of heat-resistant gloves, heat-resistant tape to secure your transfers, and a user manual to walk through setup. Everything needed for a first batch of mugs is in the box – additional heat plate modules for tumblers can be added later as your projects grow.

What’s in the Box

• LOKLiK Auto Mug Heat Press
• Mug heat plate module (8-8.8 cm diameter)
• 2 mm heat press mat
• 4 mm heat press mat
• Heat-resistant gloves
• Heat-resistant tape
• User manual

Note: heat plate modules for straight tumblers and for 1.2-litre handle tumblers are not included and are sold separately.